Confirming Correct Attachment - JVC KA-DV300 Manuel D'instructions

Confirming correct attachment

Use the following procedure to confirm that the KA-DV300 is correctly attached.
Memo
* Be sure to turn OFF the GY-DV300's power supply before the card is removed from the
camcorder.
E-10
e
The card indicator
shown on the right blinks
during the initialization
operation right after the
power is turned on.
1.
Turn OFF the GY-DV300.
2.
Insert the card.
3.
Turn ON the GY-DV300.
4.
Confirm the card status.
Card status
The card status is displayed on the GY -
indicator
DV300's LCD screen or viewfinder
screen in accordance with the type of
the card.
C F
: Card not inserted
e
: LAN card
: CF card