X10 Wireless Technology AudioLink AK14 Guide Utilisateur page 6

Installation and Setup
Connecting up the AT14 Transmitter:
1. Push open the battery compartment on the AudioLink Wireless
Sender.
3. Attach your MP3 Player or PC
Audio out to the AudioLink Wireless
Transmitter by sliding the jack into
your MP3 Player's headphone
socket.
4. Set the slide Channel Switch (1 or 2) to match the setting on your
AR14 Wireless Receiver.
5. Move the ON-OFF switch to ON.
P/N033000H13840 rev.01-05-06
2. Insert the supplied
rechargeable battery.
Observe polarity. Replace
only with rechargeable
battery.
*AK14: NiMH AAA
800mAh
6
BMB Home AudioLink
1.2V