Instructions For Use; Setting The Clock - Bosch PAD 12001 Mode D'emploi

Instructions for use

Setting the clock

1.
Press for 2 seconds. The
time starts flashing.
When the appliance is turned on for the first time,
the symbols for all the functions available are
displayed momentarily. These then disappear
leaving only the clock on the display screen. It is
necessary to set the clock to the real time:
2.
Adjust the time flashing on
the display screen using
–
and until the real time is
displayed. The time on the
clock changes in one-minute
blocks.
The clock function is independent of all other
functions and can be used as long as the appliance
is connected to the mains electricity supply.
The digital screen is fitted with a lighting system for
all the functions displayed so that the options
selected remain visible even in poorly lit corners.
Important!
The clock continues working for 8 hours after
the appliance has been unplugged. It may be
necessary to reset the clock on connecting the
appliance if it has been left unplugged for
longer.
3.
Do not press any of the
+
buttons on the appliance for
a period of 5 seconds. The
time display stops flashing
and the real time is now set.
25