Cleaning And Maintenance - Kampa Roast Master Notice D'utilisation

2. Disconnect the regulator from the gas cylin-
der.
I
NOTE
The gas container may be disconnected
although some gas remains.
3. Check the contents of the gas container by
shaking the gas container. If there is a sound or
feeling of liquid movement, the cylinder con-
tains gas.
4. If necessary, dispose of the gas container
according to the instructions printed on the
gas container.

Cleaning and maintenance

!
CAUTION! Burn hazard
The device is very hot when you use it.
Leave the device to cool down before
you clean, pack up or transport it.
Cleaning the device
A
NOTICE!
Do not clean any part in the self-cleaning
oven as this may damage the finish.
➤Clean the stove top surface with soapy water
and a nylon cleaning pad.
Burner
➤Clean the burner with a wire.
➤Use hot soapy water and a soft bristle brush to
clean the burner surface.
➤Ensure that corroded or damaged burners are
replaced by an authorized service agent.
Maintenance
➤Tighten all hardware on a regular basis (1 to
2 times a year or more depending on usage).
➤Ensure that an authorized service agent per-
forms a maintenance check at least every
5 years.
10
Storing the hob and oven
!
WARNING! Explosion hazard
Do not store or transport the hob and
oven while it is still connected to a gas
container.
1. Disconnect the hob and oven from the gas
container (see chapter "Disconnecting the
hob and oven from the gas container" on
page 9).
2. Store the device and the gas container in a
cool, dry and well ventilated area free from
direct sunlight, heat and ignition sources.
Troubleshooting
Fault
The hob and oven fails
to light.
The heating perfor-
mance decreases.
Warranty
The statutory warranty period applies. If the
product is defective, please contact the
manufacturer's branch in your country (see
kampaoutdoors.com/store-locator) or your
retailer.
For repair and warranty processing, please include
the following documents when you send in the
device:
• A copy of the receipt with purchase date
• A reason for the claim or description of the fault
Disposal
➤Place the packaging material in the appropriate
recycling waste bins, wherever possible.
M
If you wish to finally dispose of the product,
ask your local recycling center or specialist
dealer for details about how to do this in
accordance with the applicable disposal
regulations.
4445103339
Suggested remedy
Contact your dealer or an
authorized repair center.