Setting An Alarm; How The Alarms Work; The Snooze Feature - Boston Horizon Duo-i Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32

Setting an Alarm

If you plan to use the wake to music function, note that the last source and volume level
settings will be used for this alarm.
1
Press the
alarM 1
turn on the alarm and set the alarm type. One press selects
wake to music
. A third press selects both. Press the button a fourth time to
cancel the alarm.
This example shows how the display might look after the Duo-i is turned
off. The current time is displayed and the icons show Alarm 1 is on set for
wake to music and tone and Alarm 2 is on set to tone only.

How the Alarms Work

When an alarm is triggered the icon for the alarm starts flashing.
If you selected wake to tone, the alarm tone starts sounding, quietly at first then with increasing volume.
If you selected wake to music with a radio, the station you last tuned to is played at a gradually increasing
volume
If you selected wake to music from your ipod, the selected song is played at a gradually increasing
volume.
If you selected wake to music and tone, the radio station or iPod song you selected begins playing at a
gradually increasing volume. If you do not turn off the music source alarm after five minutes the music stops
playing and the alarms tone begins to sound at a gradually increasing volume.
To turn off the alarm press the

The Snooze Feature

If you want to sleep a while longer after the alarm sounds
you can use the "Snooze " feature. Simply touch the outer
metal rim around the Duo-i. This will delay the alarm for
ten minutes. Each additional touch of the rim increases
the length of the "Snooze" alarm delay by 5 minutes. The
maximum delay is 60 minutes. The display shows the
time and a flashing Alarm icon.
To see how much "Snooze" time is left touch the metal rim once. If you touch the rim again another five
minutes is added to the "Snooze" time for each additional touch.
To cancel the "Snooze" function press the alarm 1 or alarm 2 button for the active Alarm or the
button.
VOluMe
12
or
buttons one or more times to
alarM 2
. A second press selects wake to tone
pOwer/VOluMe
control.
Touch Sensitive Rim
pOwer/

Publicité

Table des Matières
loading

Table des Matières