Care and Maintenance
WARNING: Before you perform any cleaning or maintenance work, turn off the electricity at the main circuit breaker panel.
□ Wipe the fixture with a damp, soft cloth. Do not use any abrasive cleaners or cleaners that contain alcohol.
□ When replacing bulbs, use 100-watt MAX, incandescent, medium-base, or equivalent CFL or LED bulbs.
Troubleshooting
Problem
The light will not turn on.
The fuse blows or the circuit breaker
trips when the light is turned on.
Possible Cause
A bulb is burned out.
The power is off.
There is a faulty wire connection.
There is a faulty switch.
There are crossed wires or the power
wire is grounding out.
7
Solution
Replace the bulb.
Ensure the power supply is on.
Check the wiring.
Contact a qualified and licensed electrician if you are
not comfortable troubleshooting wiring problems.
Test or replace the switch.
Discontinue use of the fixture. Check the wire
connections or contact a qualified electrician.
Please contact 1-855-HB-HAMPTON for further assistance.
HAMPTONBAY.COM