Rating Plate; Product Liability; Safety; Safety Definitions - Husqvarna AME 600 Manuel D'utilisation

Symbols on the product
WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the manual carefully and make sure
that you understand the instructions before
you use the product.
Use approved protective gloves.
Use hearing protection.
Double insulation.
The product or package of the product is not
domestic waste.
Protection against solid objects that are
larger than 1mm and water splashing from
all directions.
This product is in compliance with applicable
EC directives.
Note: Other symbols/decals on the product refer to
special certification requirements for some markets.

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
1135 - 001 - 20.11.2019

Rating plate

1
5 6
1. Product type
2. Manufacturer
3. Product number
4. Production month/year
5. Motor speed, rpm
6. Voltage, V
7. Current, A
8. Frequency, Hz
9. Rated power
10. Production year

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

Note: Used to give more information that is necessary in
a given situation.
General power tool safety warnings
WARNING: Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to
follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Note: Save all warnings and instructions for future
reference. The term "power tool" in the warnings refers
2 3
7 8 9
4
10
3