Technical Data; Care And Cleaning - Speaka Professional HDMI 4K2K Mode D'emploi

Setup
a) Installation
• Transmitter and receiver are each provided with 4 slotted holes.
• The package includes 8 screws. The devices can thus be screwed to a solid surface if
necessary.
Ensure that you do not damage cables or wires when drilling holes or tightening
screws. Accidentally drilling into electrical cables can cause a fatal electric shock!
Look after your own safety when using electric tools (e.g. a drill). Wear eye
protection.
b) HDMI connection
Example of a connection diagram
Transmitter (TX)
HDMI In
HDMI In
• Turn off all devices and disconnect them from the power supply before connecting each
component.
• Connect your HDMI device (e.g. Blu-Ray player, TV box) and the HDMI In (8) on the
transmitter with a suitable HDMI cable.
• Use the CAT 6/6a/7 network cable to connect the CAT Out socket (2) of the transmitter to
the CAT In socket (10) of the receiver.
• Connect an HDTV / Monitor and the HDMI Out socket (16) to the receiver with a suitable
HDMI cable.
• Insert the round plug of the power adapter into the 12 V/DC power adapter socket on the
transmitter (5) or receiver (13) and tighten the union nut clockwise. Connect the power
plug to an appropriate power outlet. Power is supplied to the receiver or transmitter via
the network cable. The product has the PoC (Power over Cable) function that ensures the
bidirectional power supply via the network cable.
• Disconnect the power plug from the mains socket when the product is not in use.
c) Brief description of the controls
Control Function
CAT socket Connect network cable. It is also used to power the
upstream or downstream device (PoC). The power supply
is bidirectional.
HDMI In socket
Connect HDMI device.
HDMI Out socket Connect HD TV/Monitor.
12 V/DC power adapter Connection for the power adapter.
socket
LED Power
It indicates that the product is receiving power.
LED Link It indicates that the product detected a connection (input and
output).
IR In socket IR receiver socket (receive remote control signal).
IR Out socket
IR transmitter socket (send remote control signal).
USB socket This socket has no function. Do not connect any devices to
this socket, as this may damage the product. This socket
should only be used by the manufacturer for maintenance
purposes.

Care and cleaning

• Disconnect the product and connected devices from the power supply before each cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
may damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be placed in household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to environmental protection.
Receiver (RX)
HDTV
CAT6/6A/7 HDMI Out
CAT6/6A/7 HDMI Out

Technical data

a) Transmitter (TX) / Receiver (RX)
Input voltage/current ..................12 V/DC, 2 A
Bandwidth ..................................up to 10.2 Gbps
Colour depth ..............................12 bit
HDMI port ..................................Transmitter HDMI input, receiver HDMI output
Video resolution ......................... 4K2K 30 Hz 4:4:4, 1080p/60 Hz
Compatibility ..............................HDCP 2.2
Transmission type......................via RJ45 network cable
PoC ............................................bidirectional
IR transmitter/receiver ...............Bidirectional
EDID data support .....................from HD Monitor to HDMI source device
Operating temperature ..............0 to +40 °C
HDTV
Storage temperature ..................-20 to +60˚C
Operating/storage humidity .......5 - 90% relative humidity
Dimensions (W x H x D) ............90 x 29 x 98 mm (per device)
Weight .......................................approx. 293 g
b) Power adapter
Input voltage/current ..................100 - 240 V/AC 0.8 A
Output voltage/current ...............12 V/DC, 2 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
(CAT6/6a/7 network cable, max. length 50 m)
*2141854_v2_1119_02_hk_m_en