ENGLISH
POWER button :
Press the power button for 3 seconds to turn on or off the wine cooler.
LIGHT button :
Press the light button to turn on or off the interior light of the appliance.
Press and hold the light button to select the temperature display in degrees Celsius (°C) or Fahrenheit
(°F). The corresponding indicator light will flash.
Unlock the control panel :
Press
and
buttons for 3 seconds to unlock the control panel.
After 2 minutes without activity the control panel will lock automatically.
When you press the display control unit's
button, the LED display number gradually decreases up to
5°C; when you press the display control unit's
button, the LED display number gradually increases
up to 18°C. You can chose a certain position, which means that if the temperature in the wine cooler
reaches the set point, setting temperature system stops the cooling system in a way that the temperature
in the cabinet rises gradually. When the inside temperature rises above the set point, cooling system
starts to work again.
To view the set temperature at any time, press the
or
button. The set temperature will flash in
the display window for 5 seconds. After 3 seconds, the temperature inside the unit will reappear in blue
in the display window.
When the surrounding temperature is 25℃ and the wine cooler has no bottle loaded, it will take
around 45 minutes to increase the wine cooler's temperature from 5℃ to 12℃. Under the same
circumstance, it will take around 60 minutes to decrease the wine cooler's temperature from 12℃
to 5℃. The less the temperature span is, the less time it will take. The setting temperature of
upper zone should be lower than the setting temperature of lower zone
Handle installation
CAUTION! DO NOT USE POWER TOOLS. CAUTION! BLACK WASHER MUST BE INSTALLED. CAUTION!
OVERSCREWING CAN SHATTER THE GLASS DOOR.
63