Technical Data - Renkforce 1681993 Mode D'emploi

Operation
a) Making a link (pairing)
• Activate Bluetooth on your mobile device.
• For initial operation, press and hold the O button until the LED flashes red and blue in turn.
• After a short time, TH-BT008 will appear in the list of available Bluetooth devices on your
device. Select TH-BT008.
If you are prompted to enter a password, enter 0000.
• As soon as the connection is successful, the blue LED flashes once every 5 seconds.
When an audio signal is transferred, the blue LED flashes once every 10 seconds.
With some mobile phones it may be necessary after the pairing process to confirm
the link between your mobile phone and the product.
This is normally necessary if you already have at least one other Bluetooth device
registered to the mobile phone or if the mobile phone is connected to another device
(such as a Bluetooth headset).
The link will disconnect if the product or paired Bluetooth device is turned off
or removed from range. When the respective device is turned back on or when
the Bluetooth device comes back into range of the product, the connection is
automatically restored.
To enable this automatic reconnection, this function may need to be activated on
the Bluetooth device (please inform yourself on this point in the instructions for your
Bluetooth device).
b) Switching on and off
• To switch on the product, press and hold the O button until the message "power on" sounds
from the earphones.
You will hear the message "pairing". The product tries to establish a connection.
Once the connection is established, you will hear the message "connected".
• To switch the product off, press and hold the O button until the message "power off" sounds.
The red LED flashes three times.
c) Hands-free set
Picking up a call
Ending a call
The microphone is located in the control panel unit next to the LED.
d) Adjusting volume
Increase the volume
Decrease the volume
When you reach the minimum/maximum volume, an acoustic signal sounds.
e) Music control
Playback/pause
Next track
Beginning of track/Previous track
Troubleshooting
The headset does not respond to key commands, automatically stops playback or does
not turn on.
• The battery has depleted. Recharge the battery completely.
No sound.
• The volume is set to the minimum.
• The device is no longer paired. Repeat the pairing process.
• The devices are not within range (max. 10 m).
There are drop outs in playback.
• The devices are not within range (max. 10 m).
• Other devices are interfering with radio transmission. Increase the distance to such devices.
Care and cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the casing or cause the product to malfunction.
• Do not immerse the product in water.
• Use a dry, lint-free cloth to clean the product.
• The ear plugs can be removed to clean the earphones.
Briefly press the O button
Briefly press the + button
Briefly press the – button
Briefly press the O button
Press and hold the + button
Press and hold the – button
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this
product conforms to Directive 2014/53/EU.
Click on the following link to read the full text of the EU Declaration of Conformity:
www.conrad.com/downloads
Select a language by clicking on the corresponding flag symbol and then enter
the product order number in the search box. The EU Declaration of Conformity is
available for download in PDF format.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. Always dispose of the product according to the relevant statutory
regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.

Technical Data

Rechargeable battery ................... LiPo, 110 mAh
Current consumption .................... 20 mA
Charging current ........................... 80 mA
Charging time ............................... approx. 1.5 h
Operating time .............................. approx. 5 h
Standby time ................................. approx. 150 h
Bluetooth version .......................... V4.1
Bluetooth profiles .......................... HSP, HFP, A2DP and AVRCP
Radio frequency ........................... 2.4 – 2.48 GHz
Transmission power...................... 0.2 mW
Range ........................................... max. 10 m
Microphone sensitivity .................. -42 dB ±3 dB
Signal-to-noise ratio ...................... ≥80 dB
Sound pressure level .................... 95 dB
Protection class ............................ IPX4
Operating conditions ..................... -10 to +40 °C, max. 85 % RH
Storage conditions ........................ -25 to +55°C, max. 85 % RH
Weight .......................................... approx. 26 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *1681993_v3_0719_02_dh_m_en