Getting Started; Installing Your Ezi-Dab-One; Vehicle Requirements - Alpine EZi-DAB-ONE Mode D'emploi

Getting started

Installing your EZi-DAB-ONE

Before you can start using your EZi-DAB-ONE, you need to do the following:
1. Position the antenna in your vehicle.
2. Position the controller in your vehicle.
3. Connect the antenna to the controller.
4. Connect the controller's power and audio cables to your vehicle.
5. Switch your EZi-DAB-ONE on for the first time.

Vehicle requirements

Fitted audio system with auxiliary (3.5mm) port or FM receiver.
l
Standard 12V negative earth power supply. Your EZi-DAB-ONE is not suitable for use with a 24V power supply.
l
Getting the best DAB signal
As with FM radio, DAB signal coverage changes depending on your location. As you use the EZi-DAB-ONE in your vehicle, you
may travel through areas where DAB signal coverage is poor.
6