IOGear HVER GKB740 Guide De Démarrage Rapide page 4

LED Edge Light Function
The HVER STEALTH has built-in LED lighting around the edge of the keyboard
with three lighting modes: Solid, Breathing and Off. Scroll through the modes by
pressing the Fn+F9 keys.
LED Backlight Functions
The HVER STEALTH has 15 built-in backlight modes and is also programmable
using the HVER STEALTH user software. The built-in backlight modes are
scrolled through using the Fn+F9 keys.
Backlight Pattern Adjustments
Press Fn + ▲ to change pattern color back.
Press Fn + ▼ to change pattern color forward.
Press Fn + ◄ to shift light flow direction right.
Press Fn + ► to shift light flow direction left.
Press Fn + + to increase pattern speed.
Press Fn + - to decrease pattern speed.
DIY Custom Lighting
The HVER STEALTH has a DIY lighting mode that can be programmed without
using the HVER STEALTH user software to set up to five different lighting profiles.
To set the DIY lighting mode:
1. Press Fn+1 to start programming lighting profile 1.
2. Press Fn+Esc.
• The 4 status LEDs will begin flashing.
3. Press the keys you want to light. Each press will cycle the key color as follows:
Red, off, Blue, off, Violet, off, White, off, Green, off, Yellow, off.
4. Press Fn+Esc again to exit and save setting.
• The 4 status LEDS will stop flashing.
5. Repeat for lighting profiles Fn+2-Fn+5.
Hotkeys
There are 12 hotkeys offering quick access to the most commonly used functions.
Press Fn + F1 through F12 to activate the desired function.
Windows Hotkeys
Fn+F1
Fn+F2
Fn+F3
Fn+F4
Fn+F5
Fn+F6
Fn+F7
Fn+F8
Fn+F9
Fn+F10
Fn+F11
Fn+F12
Function
My Computer
Web Browser
Email
Calculator
Stop
Previous Track
Play/Pause
Next Track
Change Lighting
Volume Down
Volume up
Mute
3