Bond 52157 Guide D'utilisation page 10

ASSEMBLY INSTRUCTIONS
Step 9
Optional: Use the anchor (PP) to fasten the product into
the ground.
Hardware Used
PP
Anchor
Step 10
Place the propane gas tank (not included) on the base.
Tighten the belt to ensure the propane gas tank is fully
secure.
Step 11
Turn the cylinder valve on the tank clockwise
to close the propane tank. Attach the regulator
(J) to the cylinder valve by turning the
regulator coupling nut clockwise. Make
sure it is fastened securely and tighten
connections by hand only.
Bond Manufacturing Co., Inc. | Page 10
x 3
PP
J