PowerCare AP31042 Guide Rapide

WARNING:
To reduce the risk of injury, user must read and under-
stand the operator's manual for their pressure washer
and any accessories before use. Fits AP31022 Power-
Care Surface Cleaner and HU80833, HU80833A, and
HUCA80833A Husky Pressure Washers. Ensure compat-
ibility and proper fit before using this replacement kit.
Wear eye protection marked to comply with Z87.1. Turn
off the pressure washer before installing this kit. For cold
water use only.
PACKING LIST
Replacement Brush Skirt
6 Screws (M5 x 16, Pan Hd.)
6 Lock Nuts (M5)
Instruction Sheet
TECHTRONIC INDUSTRIES NORTH AMERICA, INC.
Refer to the operator's manual for your surface cleaner attachment
and/or pressure washer for operating instructions.
Hwy 8, Pickens, SC 29671
15 in. DECK BRUSH SKIRT
TOOLS NEEDED
Wrench (8 mm)
Phillips Screwdriver
INSTALLING THE DECK BRUSH SKIRT
REPLACEMENT KIT
n Disconnect the high pressure hose from the surface
cleaner attachment and/or pressure washer.
n Position the surface cleaner deck so you can access the
6 screws on the deck brush skirt.
n Remove the 6 screws and nuts holding the brush skirt
in place. Discard the old brush skirt and, if desired, the
screws and nuts.
n Place the new brush skirt in place, aligning holes in brush
skirt with holes in surface cleaner deck.
n Install 6 new screws and nuts as shown; fasten
securely.
1-866-340-3912
REPLACEMENT KIT
6-9-09 (REV:00)
AP31042
987000-776