Manual
Introduction
Thank you for purchasing the LINDY 2 or 4 port VGA Matrix with Audio. The VGA Matrix offers
maximum convenience when you need to connect multiple VGA sources and displays together. It
features 2 or 4 VGA & Audio input source ports and 2 or 4 VGA & Audio output ports. Each of the
sources can be directed to any of the displays using the supplied remote control. It's an ideal solution
for multiple VGA & Audio distribution use in retail product demonstration, training and public display
applications.
With the ability to daisy-chain more than one Matrix you can expand the number of computers you
can connect, up to 3 layers. And with the built-in video signal enhancement, you can place the
display up to 65m away while still maintaining your video quality
Features
Display up to four video inputs from two or four computers on two or four displays
•
PC selection via push buttons or IR remote control
•
IR remote control allows you to switch outputs from up to 6 feet away
•
Supports daisy-chain to expand the number of computer connections up to 3 layers
•
Video signal enhancement allows monitors to be placed up to 65m away
•
Supports video resolutions of up to QXGA 2048x1536@85Hz
•
Package Contents
VGA Matrix (2 or 4 port)
•
Power Adapter 5V DC 1A
•
IR Remote controller
•
This user manual
•
Specifications
PC connector ports:
•
Video – 2 or 4, 15 Way HD Female
•
Audio – 2 or 4, 3.5mm Stereo Jack
•
Console ports:
•
Video – 2 or 4, 15 Way HD Female
•
Audio – 2 or 4, 3.5mm Stereo Jack
•
DDC, DDC2 monitor support
•
450Mhz Bandwidth
•
Maximum resolution up to 2048x1536@85Hz
•
5VDC 1A PSU
•
Operation:
Note: Please make sure all devices are powered off before connecting any cables.
1
Connect your PC's to the VGA Matrix with audio using 15 Way HD VGA cables and 3.5mm
jack cables
2
Then connect the VGA Matrix with audio to your displays and speakers using 15 way HD
VGA Cables and 3.5mm jack cables
3
Plug in the supplied power supply
4
Power on all devices starting with the VGA Matrix then the monitors and finally the PC's
5
Pressing the button on the front of the unit will change change the PC input for the selected
monitor
6
You can also use the supplied remote control to change inputs
2
English