Maintenance & Repair - Wavetek Meterman TM45 Manuel D'utilisation

Table des Matières

Publicité

In case you do not obtain the expected measurement result: ❶ Check
the batteries. ❷ Review the operating instructions for possible mistakes
in operating procedure. ❸ Inspect the thermocouple probe for a broken
or intermittent connection.
Except for the replacement of the batteries, repair of the thermometer
should be performed only by the Factory or by a Factory Authorized
Service Center.
The front panel and case can be cleaned with a mild solution of deter-
gent and water. Apply sparingly with a soft cloth and allow to dry com-
pletely before using.
D • Unterhalt & Reparatur
Prüfen Sie zuerst folgende Fehlerquellen: Meßkabel (Brüche),
Anschluß, Zustand von Batterie, richtiger Meßvorgang, Eingangs- und
Bereichsgrenzen, usw.
Mit Ausnahme des Batteriewechsels soll jede Reparatur nur durch eine
durch Wavetek anerkannte Servicestelle durchgeführt werden.
Das Gerät kann mit einer milden Seifenlösung gereinigt werden.
Sparsam auftragen und vor Gebrauch gut trocknen lassen. Keine
Lösungsmittel zum Reinigen verwenden.
E • Maintenimiento Y Reparación
Para identificar la causa del problema: Compruebe la pila; revise las
instrucciones de uso; inspeccione las puntas de prueba por si hay una
conexión rota o intermitente.
Excepto la sustitución de la pila o el fusible, cualquier trabajo de
reparación del multímetro debe hacerse exclusivamente por personal
técnico cualificado para este tipo de reparaciones.
Para limpiar la carcasa puede utilizarse una solución suave de agua y
detergente.
MAINTENANCE & REPAIR
– 16 –

Publicité

Table des Matières
loading

Table des Matières