Technical Data - SNOWJOE Sunjoe 24V-300WI Manuel D'utilisation

Technical Data

DC Input | Battery Voltage Max* .................................. 24V D.C.
AC Output Voltage .......................... 115 V A.C. | 60 Hz | 300 W
USB-A Output Voltage ................................ 5/9/12 V, up to 3 A
USB-C Output Voltage ........................... 5/9/12/20 V, up to 3 A
Output Wave Form ............................................. Pure sin wave
LED Reading Light ..................................................... 1 W total
Spotlight ............................................................................. 3 W
Battery Charging Input ....... 100 - 240 V A.C. | 50/60 Hz | 50 W
Battery Charging Output ....................... 25.2 V D.C. | 1400 mA
Wireless Charger .............................................................. 10 W
Net Weight ......................................................... 3.2 lbs (1.5 kg)
* Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage
under typical load is 21.6 volts.
Unpacking
Carton Contents
• Cordless power station
• iON+ 24V lithium-ion battery charger
• Manual with registration card
1. Carefully remove the cordless power station and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
power station. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils or small
parts. These items can be swallowed and pose a suffocation
risk!
Battery Pack Operation
The equipment is powered by lithium-ion battery. The battery
pack is completely sealed and maintenance free.
customer service center at
®
TOOL ONLY
BATTERY SOLD SEPARATELY
In order to operate this cordless power station you will
need at least one iON+ 24V System battery. For optimal
performance of this unit, it is recommended to use the
2.0 Ah battery (24VBAT-LTE) or greater. See page 15 for
battery and charger options and specifications, or for more
information visit sunjoe.com.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level
is decreasing. Stop discharge the battery as soon as
possible.
• 1 level monitoring LED is lit: Battery is flat. Stop
discharge the battery IMMEDIATELY and charge the
battery. Otherwise the battery's service life will be greatly
shortened.
Lights Light Indicators
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
NOTE: If the charge level button does not appear to be
working, connect with the power station or the iON+ 24V
lithium-ion battery charger and charge as needed.
NOTE: Immediately after discharging, the charge level button
of the battery may display a lower charge than it will if checked
a few minutes later. The battery cells "recover" some of their
charge after resting.
Operation
m
WARNING!
Do not allow familiarity with this product
to make you careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
7