Before First Use - Westinghouse WFVCR310 Instructions

BEFORE FIRST USE

1. Unpack the appliance and all accessories carefully. Retain the packaging for
future reference or later use. For packaging disposal or recycling, contact your
local authority.
2. Make sure the appliance is not damaged and that there are no missing
accessories. Return the appliance to the retailer if there are any missing or
damaged parts.
Note:
• This appliance can be used on wooden, tile and cement floors and short fur
carpet (less than 1 cm long).
• This appliance must not be used in spaces with a height of less than 6 cm such
as under a bed and sofa, as it may get stuck during use.
• Remove power cords, threads or debris on the ground before use to avoid
tripping or winding the robotic vacuum cleaner.
• To clean carpet tassels, you will need to remove two edge-cleaning side brushes
(12) (18) to enable the main unit to start moving.
CHARGING THE ROBOTIC VACUUM CLEANER
Manual charging
Connect one end of the power adapter (d) to the charging socket (3) on the main
unit (a) and the other end to a wall outlet.
• The green light will flash and you will hear a voice message.
• The robotic vacuum cleaner will start to charge.
• The green light will stay constant when charging is complete.
Auto-recharging
1. Place the charger (c) on a flat surface. Make sure there are no obstacles within a
range of 0.5 m to the left and right and 1.5 m in front of the charger (c).
2. Connect one end of the power adapter (d) to the charging socket (28) on the
charger (c) and the other end to a wall outlet.
• When the battery level is low, the robotic vacuum cleaner will automatically
return to the charger (c) and charge itself.
Note: The charging contacts (11) on the main unit will align with the charging pins
(29) on the charger during charging.
WFVCR310_Roboticvacuumcleaner_5L.indd 7
EN
7
11/19/2019 3:14:21 PM