ShelterLogic 25757 Instructions De Montage page 4

2. AsseMBle rOOF FrAMe
NOTE: Swedged tubes insert into plain ends at the crimp marks.
3. AsseMBle legs & AttACh tO rOOF FrAMe
Attach all legs to one side first. Let the other side of roof frame rest on the
ground. Repeat for opposite side.
4. ANChOr the FrAMe
Insert the (4) Anchor pins into the ground and tie ropes from the anchors to the corner tees as shown below.
These are temporary spike anchors. Not intended for permanent use.
Page 4
Swedged Tubes Connections
13104 13103
Leg Pole Assembly
13105
13103
10075
Tie Rope Around Frame Corners
13101
13105
rope
05-25757-0D