Mellerware ROBOT 500 INOX Mode D'emploi page 4

4. Cleaning
4.1. Disconnect the appliance from the mains power sup-
ply and allow it to cool completely before undertaking any
cleaning task.
4.2. Do not immerse the detachable shaft of the blender
and the whisk in water because overtime the lubrication on
the bearings may wash away. Wash the detachable shaft
under running water. Do not use solvents, or products with
an acid or base pH such as bleach, or abrasive products,
for cleaning the appliance.
4.3. After cleaning the detachable shaft, place it upright so
that any water which may have gotten in, can drain out.
4.4. Wash the measuring beaker and chopping bowl in
warm soapy water. The bowl and the beater are not to be
placed in a dishwashing machine as the plastic compo-
nents can deteriorate.
4.5. Wipe the motor unit with a damp cloth. Never immerse
it in water for cleaning as electric shock may occur.
4.6. Dry all parts thoroughly.
Caution: Blades are very sharp, handle with care.
5. Anomalies and repair
5.1. Take the appliance to an authorised support centre if
product is damaged or other problems arise.
5.2. If the connection to the mains has been damaged, it
must be replaced and you should proceed as you would in
the case of damage.
Untitled-1.indd 4 2018-11-13 08:06:39 AM