Using The Led Light; Operation Tips; General Maintenance - sunjoe PPG400 Manuel D'utilisation

Using the LED light

1. Turn on the power station by pressing and hold the power
switch until the LCD screen shows the standby display
(Fig. 6).
2. Press the LED light switch to turn on the LED light. Press
it again to turn off the light (Fig. 11).
Fig. 11
LCD Screen (LED
light mode)
3. Hold the power station by the handle to use it as a
spotlight (Fig. 12).
Fig. 12
Turning off the Power Station
NOTE: To avoid depleting the battery power, make sure to turn
off the power station when not in use.
1. If the AC power is turned on, switch off the AC output
switch and disconnect all devices from either side of the
station.
2. Press the power switch to turn off the power station.

Operation Tips

1. This product may become hot during charging, this is
normal.
2. Avoid storing this device near coins, jewelery, keys, and
other metal objects. An accidental electrical discharge
may cause damage.
3. Do not place the unit near or under intense heat or fire.
4. The unit is not waterproof, avoid water and other liquids.
5. Do not drop the unit. Do not place heavy objects on the
6. Do not cover this product with towels, clothing during use.
7. Do not charge the power station longer than the time
Using the Wireless Charger
LED light switch
The top of the power station can also serve as a wireless
charger. With the power station turned on, place your device
LED light
on the wireless charging pad on the top of the power station.
The power station will start to charge the device (Fig. 13).
Fig. 13
Maintenance
m
disconnect any devices plugged in before performing
inspection, maintenance, and cleaning work.
m
replacement parts. Use of any other parts could create a
hazard or cause product damage.

General Maintenance

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
m
gasoline, petroleum-based products, penetrating oils, etc to
come into contact with plastic parts. Chemicals can damage,
weaken or destroy plastic, which could result in serious
personal injury.
8
product.
required to fully charge.
WARNING!
Always switch the product off and
WARNING!
When servicing, use only identical
WARNING!
Do not at any time allow brake fluids,