Publicité
Installation manual
Ø 80mm
Step 1
Make sure a 80mm hole is available in
the desk top.
Step 4
Connect the GoBright Desk Connecti-
on Cable to the applicable connection
sockets.*
* Cable & power supply options:
Option 1: USB power via CC1-LINAK-USB cable
With the CC1-LINAK-USB cable the DCF1 can be powered via an USB power source.
The USB power supply should be of high quality, CE certified, and capable of minimum 3A at voltage 5V, maximum 3A at
voltage 5V.
Option 2: USB power via CC1-LINAK-LP cable
With the CC1-LINAK-LP cable the DCF1 can be powered via a LINAK CBD6S controlbox, the power cable should con-
nected to the 'DC' port of the LINAK CBD6S controlbox.
Version 1.1
November 2021
Step 2
Push the springs of the Connect
downwards and push the Connect into
the hole until the springs unfold at the
bottom of the desk top.
Step 5
Configure a Desk in the GoBright
platform (https://www.gobright.com/
platform).
User manual & safety instructions
GoBright
Step 3
To prevent the Connect from moving
while in use lock it to the desk. Push
the Connect upwards and remove
tabs with a twist. Firmly push down to
make it stick.
Step 6
Join the Connect with a GoBright
Gateway.
Page
4
Publicité
