Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
OPERATING MANUAL/PARTS GUIDE
Thank You for purchasing a Jiffy® Ice Drill. When properly maintained and
serviced, we are confident that your drill will provide you with many years
of trustworthy performance. This manual contains operating and safety
instructions for the Jiffy® Model 56/E6 Lightning™ Power Ice Drill. To
receive the greatest possible performance and satisfaction from your
Jiffy® Power Ice Drill, and to reduce the risk of injury, it is important that
you read and understand the assembly, operating, maintenance, and
safety instructions before using your Jiffy® Power Ice Drill. Contact
Feldmann Engineering if you do not understand any of the instructions in
this manual.
As with any power tool, safety precautions must be observed with the
Jiffy® Power Ice Drill to reduce the risk of personal injury. Careless or
improper use may cause serious injury and/or damage to your Jiffy®
Power Ice Drill.
INDEX
General Information ..........................
Warranty.........................................
About Lithium Ion Battery Power .........
Important Safety Precautions ..............
Pre-Use Procedure............................
Operating Instructions........................
Transporting and Storage...................
Maintenance and Adjustments.............
Service & Repair Information...............
Diagram of Main Parts, Parts List.........
Troubleshooting Guide.......................
MANUFACTURER'S Two Year Limited Warranty
(30 days for Commercial and/or Rental Use)
FOR WARRANTY SERVICE - DO NOT RETURN YOUR DRILL
TO THE RETAILER YOU PURCHASED IT FROM. CONTACT
JIFFY® -
www.jiffyonice.com, Email admin@jiffyonice.com, or
. IF YOU LIVE IN CANADA, PLEASE CALL
Phone (920) 467-6167
1-800-861-9559 FOR WARRANTY SERVICE.
Feldmann Engineering & Manufacturing Co., Inc. warrants the Jiffy®
Power Ice Drill to be made of first quality materials and workmanship and
will, at its option, repair or replace any drill part thereof found to be
defective in such materials and workmanship if returned to the factory,
prepaid within two years from the date of purchase by the original
purchaser. Inbound and outbound transportation charges are paid by the
purchaser. To obtain warranty service or replacement instructions or
replacement
parts,
please
admin@jiffyonice.com,
or
Engineering assumes no responsibility for damage caused by misuse,
careless handling, or where repairs were made or attempted by an
unauthorized person.
PAGE
1
1
2
2
4
4
5
5
5
6
6
7
8
go
to
www.jiffyonice.com,
Phone
(920)
467-6167.
Manufactured by:
FELDMANN ENGINEERING & MANUFACTURING CO., INC.
520 Forest Avenue Sheboygan Falls WI 53085-2513
E-mail: admin@jiffyonice.com
Website: www.jiffyonice.com
Other products: BADGER™ Earth Augers - www.badgeraugers.com
Email
Feldmann
Model #___________________
Purchased at________________
Date Purchased______________
Serial #____________________
Drill Size__________________
Register online at
www.jiffyonice.com
TurfVent™ Lawn Aeration Equipment - www.turfvent.com
Form 5603 (01/19)
Publicité
Chapitres
Table des Matières
Sommaire des Matières pour Jiffy Lightning 56
-
Page 1: Table Des Matières
Jiffy® Model 56/E6 Lightning™ Power Ice Drill. To receive the greatest possible performance and satisfaction from your Jiffy® Power Ice Drill, and to reduce the risk of injury, it is important that you read and understand the assembly, operating, maintenance, and safety instructions before using your Jiffy®... -
Page 2: Important Safety Precautions
• Jiffy® “Clean Power” no need to mix fuel and oil or having to Do not probe the charger with conductive materials. The drain the fuel tank at the end of the ice fishing season. - Page 3 Handle it with care, as any rough treatment can cause damage Unplug the charger before cleaning. to your Jiffy® Power Ice Drill or it can cause a malfunction. Always unplug the charger after charging a battery. Do not leave the battery pack in the sun or in a very Should the unit stop while drilling, do not attempt to restart it warm or cold environments for extended periods of time.
-
Page 4: Battery Charger Operation And Use
The RED LED light will come on indicating Before using your Jiffy® Power Ice Drill to drill holes in ice, follow the battery is charging. this procedure to prepare for proper and correct use. -
Page 5: Assembly And Disassembly Of Drill
IMPORTANT NOTE: BEEN DAMAGED, IMPROPERLY ADJUSTED OR NOT COMPLETELY AND SECURELY ASSEMBLED. When transporting your Jiffy® Ice Drill on an ATV or snowmobile, it is extremely important to follow these TO REDUCE THE RISK OF INJURY FROM REACTIVE instructions and use caution to avoid damage to the power FORCES, THE OPERATOR MUST HAVE A FIRM GRIP head and transmission or related equipment. -
Page 6: Maintenance And Adjustments
Name, which could make them inoperable. Many of these items are the Address, result of transporting your Jiffy® Ice Drill on a sled or other device City, State/Province, Zip/Postal Code, pulled behind an ATV or snowmobile, where water, slush, and Country, snow can be thrown up, collect and freeze on these components. - Page 7 E6 LIGHTNING™ ICE DRILL PARTS LIST XT™ DRILL ASSEMBLY PARTS LIST REF. # PART # DESCRIPTION #USED 5620 Motor Case Assembly 5605 Battery 5617 Drive Adaptor 5621 Hardware Kit (M6 x 35 Capscrew) 5621 Hardware Kit (M5 x 80 Capscrew) 5621 Hardware Kit (M5 Flat Washer) 5616...
-
Page 8: Troubleshooting Guide
56XXXXXXX-XXX. My drill runs then stops. 1. Battery may be low on power. Charge battery. 2. Check to make sure battery is pushed into its locked position. Contact Jiffy® Customer Service: Email – admin@jiffyonice.com Phone – 920-467-6167 Website – www.jiffyonice.com... - Page 9 Courriel : admin@jiffyonice.com Site Internet : service à la clientèle Jiffy le plus proche. Les frais de port dans les deux www.jiffyonice.com sens sont à la charge de l’acheteur. Feldmann Engineering n’assume aucune responsabilité...
-
Page 10: Importantes Précautions De Sécurité
3. Ne chargez pas ces batteries avec un autre type de chargeur. • Jiffy® puissance propre, inutile de mélanger le carburant et l’huile ou de 4. Ne laissez aucun type de liquide pénétrer dans le chargeur vider le réservoir de carburant à... -
Page 11: Fonctionnement Et Utilisation Du Chargeur De Batterie
Retirez la batterie du chargeur et débranchez le chargeur de la Si vous portez des chaussures à crampons ou à pointes en utilisant prise. la tarière à glace Jiffy, il vous sera plus facile de la maîtriser lorsque vous percez le trou dans la glace. -
Page 12: Avant La Première Utilisation
Jiffy local. N’essayez pas de régler le 5. Pour arrêter la vis sans fin, relâchez simplement le levier de commande moteur vous-même. -
Page 13: Utillisaion De La Tarière E6 Lighting
REMARQUE IMPORTANTE POUR LE TRANSPORT DE LA TARIÈRE À GLACE En cas de transport de la tarière Jiffy sur un VTT ou une motoneige, il est très important de suivre les directives ci-dessous et de faire attention pour éviter tous dégâts à l’ensemble moteur (moteur et transmission) et aux pièces connexes. -
Page 14: Xt Mc Pieces De Montage De Forage Liste
PIECES DE MONTAGE DE FORAGE LISTE E6 LIGHTNING™ PIECES DE MONTAGE DE FORAGE LISTE réf. pièce Désignation Qté utilisée 5620 Assemblage de carter moteur 5605 Batterie 5617 Adaptateur de lecteur 5621 Kit de matériel (M6 x 35 Capscrew) 5621 Kit de matériel (M5 x 80 Capscrew) 5621 Kit de matériel (M5 Flat Washer) 5616... -
Page 15: E6 Lightning™ Guide De Dépannage
1. La batterie est peut-être faible. Charger la batterie. termine alors. 2. Vérifiez que la batterie est poussée dans sa position verrouillée. Contactez le service clientèle Jiffy®: Email – admin@jiffyonice.com Website – www.jiffyonice.com Phone – 920-467-6167 800-861-9559 in Canada...