Door Cover Installation - Bunn Silver Serie Guide D'installation Et D'utilisation

DOOR COVER INSTALLATION

1. Install door cover by first plugging the door harness connector into the machine harness connector located
at the bottom of the machine door.
JDF-4S
JDF-2S P3577 P3577
2. On Portion Control models, connect membrane 3. Install door cover
switches to Door Circuit Board.
P3578
JDF-2S & JDF-4S
JDF-4S Shown
4. Secure the door cover using 5 screws provided.
JDF-4S
P3840
JDF-2S
P3579
5
44744.2 062912