Bluetooth - QFX PBX-1212 Manuel De L'utilisateur

CHARGING THE SPEAKER
1- Full recharge takes 8-12 hours
2- Please use the supplied charging cable to charge the speaker.
3- When you are using your unit while it is plugged to an external power source,
battery switch can be ON or OFF.
4- To protect the lifespan of the built-in battery, be sure to fully charge your unit on
the same day the battery runs out. Not charging your unit right away can affect
the performance of the battery.
WIRED MICROPHONE INSTRUCTIONS
1- lnsert the microphone plug into the microphone input jack.
2- Adjust the microphone volume knob MIC VOL for proper volume.
3- Adjust the echo depth to the proper position.
4- Now you can start using your microphone.

BLUETOOTH

You can connect your compatible wireless bluetooth devices, such as a mobile
phone, tablet etc., to listen to audio tracks.
Press the MODE button on the speaker or remote control to enter wireless mode,
indicated on the LED display.
Select "QFX PBX-1212" in your device settings to pair, and once successful, you will
hear a sound of notice on the speaker.
PRECAUTIONS
To prevent operational problems or serious damage to the speaker unit, please follow
the below precautions:
1. Pull out the power cord from the end of the plug. Do not pull the wire.
2. The speaker should be kept away from other heat sources.
3. Do not attempt to open the internal speaker unit or change the circuitry as this
may cause the unit to be damaged or cause an electrical shock.
4. If you are not going to use the unit for a long period of time, pull out the plug and
store in a cool dry place.
5.Ensure the speaker is properly ventilated & kept in a dry location. It is recommended
that the speaker be kept a minimum of 4 inches away from any wall or object.
WARNING : Do not use this Speaker in any wet location, in the rain or a location with
high moisture. Do not place any liquids or other objects on the Speaker as this may
cause an accidental short.
* Specifications are subject to change without notice.
* All Trademarks and trade names belong to their respective owners
PBX-1212 GUIDE
The exclamation mark inside an equilateral triangle is
intended to alert user of the presence of the important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
The lightning flash with arrowhead symbol inside an
equilateral triangle is intended to alert User of the presence
of un-insulated "hazardous voltage" within the product's
enclosure, which may be of sufficient magnitude to induce
a risk of electric shock to persons
NOTES:
Please do not attempt to open the back cover or power
adapter as opening or removing the covers may expose
you to dangerous voltage or other hazards, and it will also
cause the
restricted servicing to be disabled: There are no user
servicing components inside.