Important information about charging
• Only use the original wireless charging panel and accessories.
• Wireless dynamic charging system allows partial recharging.
• Fully charge is recommended to extend the battery life.
• Charge the battery for at least 8 hours before first use.
• Recharge the work light at least once in every 30 days.
Charging the lamp
• Connect the micro USB plug of the charging cable to the micro USB socket of the wireless
charging panel (12) and the other side to the 5V USB charger. The charging control (10) lights up
green.
• Position the lamp in the middle of the wireless charging panel (see illustration above).
The wireless charging panel and the lamp have magnets that facilitate alignment.
The charging control (10) lights up red.
• The battery power indicator is activated 10 seconds after positioning the lamp on the wireless
charging panel.
• During charging, the LED on the battery power indicator (8) flashes.
• When charging is complete, all four LED will be lit steadily.
• After all the green LEDs on the battery power indicator goes out and only the red LED lights, the
battery must be charged. Do not discharge the battery completely.
• After fully charging, remove the lamp from the wireless charging panel.
SCOPE OF DELIVERY
LED Workshop Lamp
Wireless Charging Panel
USB Charging Cable
USB Charger
CLEANING AND STORAGE
• Clean the lamp only with a dry or slightly moistened cloth. Do not use aggressive chemicals or
abrasive cleaners.
• Do not immerse the lamp in liquids of any kind.
• Store the lamp indoors in a dry place, protected from dust, dirt and extreme temperatures.
• Keep the lamp out of the reach of children.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment.
DISPOSAL
Do not dispose battery in household waste.
Batteries should be disposed of in a responsible manner, they must be disposed at
appropriate collection point.
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment. Contact your local solid waste authority for
recycling information or give the product for disposal to BGS technic KG or to an electrical
appliances retailer.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed