Gg Shelf Pin - Greentouch 1040IM-28-208 Instructions D'utilisation, D'assemblage Et De Maintenance

CABINET INSTALLATION
10. Slide glide roller (on track inside cabinet) to front,
Carefully align drawer box glide track (attached to
sides of drawer box ) with glide track (attached to
inside of cabinet ). Making sure drawer is aligned
and centered onto glides, gently push drawer.
CAUTION
DO NOT force drawer or damage to glide may
occur. If drawer does not slide in with ease,
remove and try again from the start.
11. Insert shelf pins (GG) at desired height, ensuring they
are level. Place center media shelf (H) on top of shelf
pins (GG).
Hardware Used
Shelf Pin
GG
NOTE: Use the pre-assembled levelers on the base
of the fireplace to level the unit. Twist the levelers
counter clockwise to increase the height, twist the
clockwise to decrease the height.
10
11
x 4
8
L
H
1052IM-28-208 En
L
GG