V-TAC VT-5145 Instructions D'installation page 37

Step1: Open the V-TAC Smart Home App and
register. If you already have an exis�ng account
with V-TAC Smart Home, please proceed to logging in.
Step3: Make sure your Smart Device is Powered.
1) Tap and Hold on the Power Bu�on for 6 seconds
to make the device available in Pairing Mode. Once
in pairing mode the LED will start blinking 3 �mes
repeatedly.
2)Tap on Next to start the pairing of device with
the app. (Shown in the image)
Note: If you are facing any trouble while pairing
in Quick Pairing mode please try to pair the
device in Compa�ble Pairing Mode (Click on the link
as shown on the image).
Step2: To Add a New device tap on the "+" sign(as shown)
135
ENGLISH