Sterilizing And Mites Eliminating Function - Manual Mode - Zoef Robot SAAR MK007S Manuel D'instructions

Sterilizing and Mites Eliminating Function --
Manual Mode
There are two cases to turn on Manual Mode as below.
(A) Turn on Manual Mode from OFF state
1.Turn on Main Power Switch at bottom surface to 'CLEAN' gear
(middle gear) .
2.Mount Handheld Cover onto the bottom surface.
3.Short press 'CLEAN' button.Hold the Handheld Stripe and move
SAAR until its top surface faces to the area to be disinfected at
a close distance (better within 2cm), two UV-C lamps at the
top surface automatically turn on, boot into Manual Mode.