Cleaning the air filters
It is recommended to clean the air filter regularly when using the device.
Dust collets on the filters and restricts the airflow and reduces the efficiency and could even
cause damage to the device. The device has 1 air filter at the rear.
The air filter requires regular cleaning and is removable for easy cleaning.
Warning! Do not operate the device without air filters in place! Otherwise the
evaporator might become contaminated.
• Switch off the device
• Remove the plug from the power source.
• Remove the filter by pulling it out of the device.
• Slide the filter to unlock it from the top cover.
• Hold the filter in an upright position and use running tap water to rinse the filter.
• When the honeycomb filter
• Slide the filter to lock it back on the top cover.
• Make sure the honeycomb filter
Cleaning the device
• Never use aggressive or abrasive cleaning materials, cleaning alcohol or sharp objects
like hard brushes or knives.
• Clean the exterior of the casing with a damp cloth.
• Then dry the exterior with a dry cloth.
Note:
• The device CANNOT be immersed in water.
5) SPECIFICATIONS
• Power input: 5 Vdc – 1A
• Power consumption: 5W
• Capacity: 0.5L
• FAN speed: 3 modes
• Air velocity: 8-9 m/s
• Sound level: ≤ 62 dB(A)
• Dimensions: 17 x 17.5 x 17.5 cm (H x D x W)
• Weight: 757 g
9
is removed the water tank
9
is placed (back) in the device.
Move the filter
in this direction
to unlock the
filter
EN 07
10
can be accessed.
Move the
filter in this
direction to
lock the filter