Before You Begin; Charge Your Headset - Belkin F8T061 Mode D'emploi

P74500ea_F8T061_man.qxd 2/6/04

Before you Begin

Warning:
The Bluetooth Hands-Free Headset
and charger have magnets in them that allow
them to dock with each other. Keep magnets at
least two feet away from computer hard drives,
and other magnetic storage media, monitors,
televisions, VCRs, videotapes, cameras, camera
film, credit cards, etc.
For Bluetooth Technology-Enabled Phones
The Bluetooth Hands-Free Headset is compatible with
Bluetooth phones (version 1.1 phones).
Check for phone compatibility on page 2, or check with your
phone manufacturer to ensure Bluetooth compatibility.
3:49 PM Page 8
8
Before you Begin

Charge your Headset

Your Bluetooth Hands-Free Headset is equipped with a
rechargeable lithium polymer battery and must be charged
prior to use.
1.
Plug one end of the power adapter into the desktop
charger and the other end into an available 230V AC
electrical outlet.
2.
Insert the Headset into the desktop charger. The
charging indicator on the charger will illuminate red.
3.
Charge the Headset for approximately two hours or until
the red charger indicator light goes out.
Note:
The red indicator light will be on while the Headset is
charging and will turn off when charging is complete.
9
1
2
3
4
5