Dell Latitude C/Dock II Expansion Station Guide page 29

Using the C/Dock II Media Bay
You may use any media device from your computer, such as a floppy drive or
CD drive, in the C/Dock II Expansion Station media bay.
NOTICE: To avoid damaging the docking device or the media device, do not
install any device in the docking device media bay that you do not normally use
in your computer.
NOTICE: To avoid damaging the docking device, do not install the travel
module or battery from the Dell Latitude computer in the docking device media
bay.
To install the computer's media device in the docking device media bay,
perform the following steps.
NOTE: The eject/locking lever must be in the unlocked position before you
install a media bay device.
Save all files, close and exit all application programs, and exit the
1
operating system.
Turn off the computer.
2
Remove any media device in the docking device media bay.
3
Press the media-bay eject button (see "Installing a Media Device in
the Media Bay"). After the device slides partially out of the media bay,
gently remove it the rest of the way.
I n s t a l l i n g a M e d i a D e v i c e i n t h e M e d i a B a y
Insert the desired media device into the docking device media bay (see
4
the figure "Installing a Media Device in the Media Bay").
media device
media-bay eject button
Sys te m I nf or m a tion Gu ide
27