Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GETTING TO KNOW YOUR ROTARY TOOL
Unpacking & Checking Contents
To avoid injury from unex-
WARNING
!
pected starting or electri-
cal shock, always remove plug from wall
outlet when tool is not in use.
Separate all loose parts from packing materi-
als and check each item with the contents
listed on the carton to make sure all items are
accounted for before discarding any packing
material.
IMPORTANT! If any parts are missing, or if
you require any assistance with these
instructions, please contact the Dremel™
Consumer Service at:
1-800-437-3635
or check our website at www.Dremel.com.
Description
The 400 Series XPR™ Rotary Tool incorpo-
rates both high-speed and performance to
Housing Cap
Ventilation Openings
serve as a carver, grinder, polisher, sander,
cutter, power brush, drill, and more.
The tool utilizes a small, but effective DC
motor. The large variety of available
Dremel™ accessories includes abrasive
wheels, drill bits, wire and nylon brushes,
engraving and carving cutters, router bits,
polishing points and more. The ability to add
different Dremel™ attachments adds to the
multi-faceted uses of the tool. The variety of
projects you can do with the tool is limitless.
The 400 Series XPR Rotary Tool is a high-
speed tool and operates at speeds 5,000 to
35,000 RPM. (A typical electric drill operates
only up to 2500 RPM!). When used with
Dremel™ accessories and attachments, the
400 Series XPR rotary tool's high speed per-
formance allows you to work on even the
most demanding projects without having to
exert undue pressure on the tool. The tool
does the work for you.
Collet Nut
Collet
Brush Cover
(one each side)
5
Shaft Lock Button
On/Off Switch
Variable Speed Dial
Hanger
Collet Wrench
Power Cord
Publicité
Table des Matières
