Elbro Profi III LCD TRMS CAT IV 1000V Manuel D'utilisation page 20

Notes
Please observe the five safety rules:
1. Disconnect
2. Ensure that the instrument cannot be switched back on again
3. Ensure isolation from the power supply (both poles deenergized)
4. Earth and short-circuit
5. Cover adjacent live parts
Intended use
The instrument is intended strictly for use in applications described in the
operating instructions. Any other usage is considered improper and forbid-
den, and can result in accidents or the destruction of the instrument. Any
such application will result in the immediate expiry of all guarantee and war-
ranty claims on the part of the operator against the manufacturer.
Remove the batteries if the instrument is not in use for a long period
of time, in order to protect the instrument from damage.
We assume no liability for damages to property or personal injury
caused by improper handling or failure to observe the safety instruc-
tions. Any warranty claim expires in such cases. An exclamation
mark in a triangle indicates safety notices in the operating instruc-
tions. Read the instructions completely before beginning the initial
commissioning. This instrument is CE-approved and thus fulfils the
required guidelines.
All rights reserved to alter specifications without prior notice © ELBRO AG,
Germany.
20 ELBRO Profi III LCD