Sygonix 1732605 Mode D'emploi page 4

Operation
Do not step on the foot switch with force! Doing so could damage it! Also, do not use
any kind of object to press down on the foot switch!
1. Insert the power plug of the electrical appliances to the outlet sockets on the power strip.
The two sockets closer to the power cord are continuous power sockets; the other four are
switchable sockets.
2. To switch on / off the four switchable sockets:
- Press the ON/OFF switch on the outlet strip, next to the POWER (RF control) LED.
- Press the paired foot switch.
When the switchable sockets have power, the POWER (RF control) LED will light
up.
Pairing / Unpairing
a) Pairing
The foot switch is paired with the outlet strip before delivery. If it is unpaired, follow the steps
below to pair them up.
1. Make sure the outlet strip is connected to a proper mains outlet of 230 V/AC. If the POWER
(RF control) LED lights up, switch it off by pressing the ON/OFF switch next to it.
2. Press and hold the ON/OFF switch, until the POWER (RF control) LED blinks slowly.
3. Release the ON/OFF switch. Then press and hold the ON/OFF switch again until the
POWER (RF control) LED blinks rapidly.
4. Release the ON/OFF switch and press on the foot switch.
5. The POWER (RF control) LED will go off. The outlet strip and the foot switch will be paired
up.
b) Unpairing
1. Make sure the outlet strip is connected to a proper mains outlet of 230 V/AC. If the POWER
(RF control) LED lights up, switch it off by pressing the ON/OFF switch next to it.
2. Press and hold the ON/OFF switch, until the POWER (RF control) LED blinks slowly.
3. Release the ON/OFF switch. Then press and hold the ON/OFF switch again until the
POWER (RF control) LED blinks rapidly.
4. Press the ON/OFF switch again and the POWER (RF control) LED will go off. The outlet
strip and the foot switch will be unpaired.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
Remove any inserted batteries and dispose of them separately from the product.
b) Battery
As the end user, you are required by law (Battery Ordinance) to return all used
batteries; disposal of them in the household waste is prohibited!
Contaminated batteries are labelled with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for the heavy metals involved are:
Cd = Cadmium, Hg = Mercury, Pb = Lead (name on batteries, e.g. below the trash
icon on the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever
batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
a) Outlet strip
Input voltage ................................. 230 V/AC, 50 Hz
Input current ................................. max. 16 A
Input power ................................... max. 3680 W
Cable length ................................. 1.5 m
Number of sockets ........................ 2 continuous, 4 switchable
Dimensions (W x H x L) ................ 62 x 42 x 446 mm
Weight .......................................... 630 g
b) Foot switch
Operating voltage ......................... 3 V/DC, battery type CR2032
Current consumption .................... max. 6 mA
Frequency ..................................... 433.92 MHz
Power ........................................... max. 15 dBm
Transmission range ...................... max. 20 m
Weight .......................................... 55 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in
part, is prohibited. This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1732605_V1_0818_02_mxs_m_en