Taking Out Of Operation And Cleaning - WAGNER UNIVERSAL EXTRA EXTENSION Mode D'emploi

GB
Tips for use.
•
When working on lying objects: Turn the suction tube forwards. (Fig. 5 A)
Spraying work when working on overhead objects: Turn the suction tube rearwards.
(Fig. 5 B)
Attention! Only hold the handle extension at the grips provided when
the unit is switched on. Touching the tension cable can accidentally
trigger the gun.
You will find further information on spraying technique, regulation of
i
material and air flow and also general information in the Operating
Instructions for the basic unit.

Taking Out of Operation and Cleaning

Proper cleaning is the prerequisite for problem-free operation of the paint application
device. No warranty claims are accepted in case of improper or no cleaning.
1) Turn off the machine and remove the plug.
2) Press the hook (Fig. 2 "click") slightly downwards. Remove the front section of the gun.
3) Remove the handle extension from the gun handle in the same way.
Attention! The handle extension is only solvent resistant to a limited
extent.
Do not immerse in solvent, only wipe.
4) Remove the handle extension and if required wipe it with a cloth soaked with water
or solvent.
To clean the front section of the gun please follow the instructions in
i
the Operating Instructions for the basic unit.
For easier assembly of the components after cleaning please apply
i
lubricating grease (enclosed) to the O-rings on the front section of the
gun and the handle extension
Pos. Designation
1 Rear section
2 Front Section
3 Spring
Lubricating grease
6
Spare Parts List (Fig. 6)
Universal Extra Extension
Order No.
2307 503
2307 505
0417 316
2315 539