Insert The Battery - CamOne Gravity Action 3D Gimbal Manuel D'utilisation

www.CamOneTec.com
Charging
Please use the supplied module to charge the battery, or alternately the optionally available car
charger.
Plug it into a compatible socket and connect the plug to the batterys port.
The LEDs on the bottom of the battery will start to flash. This shows the charging process.
As soon as the battery is fully charged, the LEDs will shine permanently.

Insert the battery

As soon as the battery is fully charged, you can slide it into the grip. Please note that it can be
inserted in one way only. The sliding is confirmed by a „click".
Do not switch on the battery yet!
13