Himsa NoahLink Manuel D'utilisation page 30

The following table describes how to use the Settings tab:
SETTING OPTION
Set battery
type
Battery
Set
„battery
low‟
warning
Set
Language preferred
language
Access
advanced
tabs
PROCEDURE
Note: You must be connected to a NOAHlink
in order to change its battery settings
 Click the pull-down menu at NOAHlink
Battery type to list the battery as Alkaline
or Rechargeable
Note: The default setting is Rechargeable
 Click Play Sound or Show message box
(or both) to receive a „low battery‟ warning
 Click Browse to choose a warning sound
 Click the pull-down menu at Reminder in
to set the length of time before a reminder
is activated (5, 10 or 15 minutes)
Note: The default setting shows the message
box and plays Chord.wav
 Click Follow NOAH to use the current
NOAH language
OR:
Click Select and choose your preferred
language from the pull-down menu
 Click the Advanced button to access the
Diagnostic, Advanced Settings,
Performance, Versions and Log tabs
NOAHlink Users Manual
27