Maintenance - Hausmann MT250 Mode D'emploi

OPERATION AND MAINTENANCE
Cutting
The sawing teeth are very sharp. Do not
touch during mounting and application.
Before sawing make sure that no live cables
will be damaged. The workpiece must be
inserted firmly or clamped tightly before it is
processed.
- Only clamp the plunge cut saw blade and
saw in a straight position. For fixation use a
tightening screw with a large disc. Carefully
remove the protective coating.
- Always set the plunge cut saw blade straight
(at 90°) and guide it in the gap without tilting.
Always guide the plunge cut saw blade along
the cutting line without exerting any pressure.
- When plunging and sawing with a slight
pendulum motion, make sure that sufficient
chip removal is provided for.
- Keep a certain distance away from hard
metals (stone/metal) (approx. 3 mm), since
there is increased danger of the outer saw teeth
breaking off.
Scraping
For scraping, use a high speed only. Work
apply only light pressure. Otherwise the scraper
can cut into the surface.
EN
26
DOUBLE INSULATION
Double insulation is a concept in safety in
electric power tools, which eliminates the need
for the standard 3-wire ground power cord.
All exposed metal parts are isolated from the
internal motor components with protecting
insulation. Double insulated power tools do not
need to be grounded.
EXTENSION CORDS
The use of any extension cord will cause some
loss of power.To keep the loss at a minimum and
to prevent overheating, use an extension cord
that is heavy enough to carry the current that
the tool will draw.
ACCESSORIES
1. Stainless steel segment saw blade
2. Clamping screw
3. Hex key
4. Clamping flange
5. Stainless steel plunge cut saw blade(large) for wood
6. Sanding sheet
7. Sandpaper fixing plate
8. Scraper blade
9. Stainless steel plunge cut saw blade(small) for wood
10. Adaptor
Environmental Protection
End of life electrical equipment must not
be placed in household waste. Please
take it to a return point. Find out about
your nearest return point from your
council or sales outlet.