Table des Matières
Publicité
responsible for ensuring that the channel set configuration is in compliance
with the regulatory standards of these countries. Please chek on the
Appendix A fore more information.
Beacon (ms): The time between two beacons. System default is 100 ms.
TX Power: Manually force the AP transmits power. System default is
100%.
No forwarding among wireless clients: No beacon among wireless
client, clients can't share information each other. System default is no
forwarding.
Hide SSID: Don't display AP name. System default no hide.
Allow BW 40Mhz: In order to use 40Mhz channel.
Click Apply in order to save all settings.
For more info please click on helb button.
The range of radio frequencies used by IEEE 802.11g wireless devices is
called a "channel". Channels available depend on your geographical area.
You may have a choice of channels (for your region) so you should use a
different channel than an adjacent AP (access point) to reduce
interference. Interference occurs when radio signals from different access
points overlap causing interference and degrading performance.
Adjacent channels partially overlap however. To avoid interference due to
overlap, your AP should be on a channel at least five channels away from
a channel that an adjacent AP is using. For example, if your region has 11
channels and an adjacent AP is using channel 1, then you need to select a
channel between 6 or 11.
Access Control
AP connected or can't connect with Mac address that user setting.
Access
Allow All
Policy
Default
Access
Access
Result
Access Control function
doesn't allows clients
whose MAC addresses
in the list will be able to
connect to this Access
Point.
Mac Table
This screen displays the station detail information of current connection.
Reject All
Reject
Access Control function
allows
clients
MAC addresses in the
list
will
be
able
connect to this Access
Point.
70
Disable
Access
Access Point doesn't
whose
check
addresses
to
MAC
Publicité
Table des Matières
