Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
b) Check the condition and operation of the spring for the lower safety guard.
Do not use the equipment if the lower safety guard and spring do not work
perfectly.
Damaged parts, adhesive deposits or accumulations of shavings
retard the operation of the lower safety guard.
c) When making a plunge cut which is not at right angles, make sure that the
saw's guide plate can not move laterally.
saw blade to jam and hence result in kickback.
d)
Do not put down the saw on the workbench or floor, without the lower
safety guard covering the saw blade.
unprotected saw blade will move the saw in the direction opposite to the cutting
direction and will saw whatever lies in its path. Pay attention, therefore, to the
deceleration time of the saw.
e) Use only sawblades with the correct diameter according to what is printed on the
saw.
f)
When sawing plastics please ensure not to overheat the saw teeth tips to avoid
melting the plastic.
TECHNICAL DATA
Type/Model:
Power connection/-frequency:
Power consumption:
Rated speed n /No load speed n
Cutting depth:
Saw blade:
Saw blade holder:
Thickness of saw blade:
Protection class:
Weight:
External diameter: 3-3/8 inch
Bore diameter: 13/33 inch
Strength: 1/15 inch
Number of teeth/segment: 30
Max. allowable rotational speed: 5200 min
Cutting materials group:
Hard metal or Tungsten Carbide (HW)
Application: Saw work
Material: Wood
Lateral movements can cause the
When slowing down after use, an
:
0
-1
9
QD6905LR
120V ~ 60Hz
4 Amp
-1
4200 min
1-1/40 inch
3-3/8 inch
13/33 inch
1/15 inch
II / Double insulated
1.86 kg
Publicité
Chapitres
Table des Matières
