Publicité
Les langues disponibles
Les langues disponibles
Centralizing Module
IMPORTANT SAFETY RULES - SAVE THESE INSTRUCTIONS!
These safety alert symbols mean Caution - a personal safety or property damage instruction.
Failure to comply with the following instructions may result in serious personal injury or property damage.
Installation and wiring must be in compliance with
your local building and electrical codes. Connect
the power cord only to properly earthed mains.
Before performing any repairs or maintenance qualified
electrician. on the drive, power must be completely
interrupted.
APPLICATION DIAGRAM
L
L
N
N
Netz
Central
M
1~
Motor
L
L
N
N
Single
Single
Single
Typical building wiring has leads with a cross section of
1.5mm2. If several motors are connected to a single supply,
the cross section of the cord conductors must be adapted
in accordance with your local building and electrical codes.
Contact a qualified electrician.
m
M
1~
Motor
Motor
L
L
N
N
Single
Single
Single
Mains 3 x 1.5
m
Motor
Netz
m
Individual operation
Technical Data:
• Continuous impulse
• 230V control line
• 230V, 50Hz mains voltage
• Max. switch output 5 A
M
1~
L
N
If more than 4 motors are connected to a
line, a larger wire cross-section should
be used.
WTMZ1
en
4 x 0.75
Netm
Motor
Individual operation
Publicité
