General Information - Levenhuk 40L Mode D'emploi

EN

General Information

The microscope is safe for health, life and property of the consumer and the environment when
properly used; the microscope meets the requirements of international standards. The microscope is
designed for observing transparent objects in the transmitted and reflected light using the bright field
method, for biological use and teaching demonstrations.
Levenhuk DEM200 digital camera was exclusively designed for use with this microscope. It allows
transfer of the precise image of the observed object to your PC display. Levenhuk ToupView software
is included in the package; it allows viewing and editing of the received images.
Specification
Magnification of objective
Eyepiece magnification
Linear field in the images space
Stage dimensions
Stage moving range
Upper/Lower illumination power
MAX resolution (at rest)
Sensitivity, v/lux-sec @550 nm
Speed (depends on the PC model)
Field of view diameter
Programmable options
System requirements
Temperature range
Legend
1 2
Barlow lens Objectives
8
nosepiece Revolving head
14 15
stand USB port Digital camera
Magnification 40x-1280x
4x, 10x, 40x
10x, 16х
Barlow lens 2x
18 mm
Tube length 160 mm, 6,299"
95x95 mm, 3,74"x 3,74"
0 to 15 mm, 0 to 0,591"
batteries or AC adapter
supply
Illumination LED
Camera model DEM200
1600x1200
Megapixels 2
Sensor 1/4" CMOS
Pixel size 2.8μm X 2.8μm
1
15 fps
Video recording Yes
Active range 68dB
Location ocular tube (not eyepiece)
Image format BMP, TIFF, JPG, PICT, SFTL etc.
18 mm
Spectral range 400-650 nm
Image size, brightness, white balance, exposure
control, etc.
Slot USB 2.0, 480 Mb/s
Windows 2000/XP(SP2)/2003/Vista; USB port
Software USB 2.0 driver, Levenhuk ToupView
Power supply via USB cable
-30...70 °C, -86...158 °F
3
Slide holders
9 10
Stand Focusing knob
16
USB cable
Levenhuk Biologic Microscopes
4 5
Stage Lower illumination
11
Diaphragm disk
17 18
Adapters Setup CD
3
6 7
Eyepiece Monocular
12 13
ON/OFF button Base