Table des Matières
Publicité
iv
Follow the assembly instructions step-by-step. In
this example, you see:
1 The step number
2 A small drawing of the subassembly you will
complete in this step
3 Parts needed for this step
4 Tools needed for this step
5 A drawing of the parts. their ID, and how to align
them
6 A number indicating previously-assembled part
required for this step. Here you should use what
you assembled in step 2.
7 Where to insert pins to lock parts in place
8 The location of the doorway. Here you can see
that the door hinge is placed outside the
greenhouse.
9 Special instructions that will help you in your
assembly.
0 Which greenhouse models this step is for. In this
example, this page is for all greenhouse models
ECO Greenhouse Assembly Instructions
1
2
2
5
1
3
4
2D
x 1
Door22
Door22
x 2
BKN
x 2
BKW
x 2
(50 mm)
BKB
x 2
2
B2
0p
B2
x 1
SR1
x 1
9
• Some glazing elements (RA, RB, RC, and RD) are placed inside the long profiles in
the interests of space.
• Certains éléments de vitrage (RA, RB, RC et RD) ont été placés à l'intérieur des
longs profilés pour gagner de la place.
• Einige Verglasungselemente (RA, RB, RC und RD) wurden aus Gründen der
Platzersparnis in die langen Profile gelegt.
• Algunos elementos de vidrio (RA, RB, RC, y RD) están colocados dentro de los
perfiles largos para ahorrar espacio.
ECO Greenhouse Assembly Instructions
3
BKB
2D
#
Pin1
x 2
BKW
BKN
SR1
Frame • Châssis • Rahmen • Marco
6
2
1
8
7
0
Publicité
Table des Matières
