Troubleshooting - Spengler TENSONIC Manuel Utilisateur

Unit Operation
80

Troubleshooting

Problem
Blood pres-
sure results
are not within
typical range
"
"
displayed
www.spengler.fr
Possible Cause
Cuff is too tight
or not properly
positioned on the
wirst
Inaccurate test
results due to
body movement
or monitor move-
ment
Cuff fails to inflate
properly
Improper ope-
ration
Pressurization is
over 300mmHg
Solution
Firmly reposition cuff
on wrist making sure no
wiggle is present.
( See Page 67)
Sit in a relaxed position
placing wrist level with
heart. Avoid speaking or
moving body parts while
testing. ( See Page 61)
Make sure hose is properly
fastened to cuff and moni-
tor unit.
Read user manual carefully
and re-test properly.
Read user manual carefully
and re-test properly.