Operating Instructions - Black & Decker BAPT01 Manuel D'instructions

SET UP & USE

OPERATING INSTRUCTIONS

Before using the air purifier for the first time, remove all packaging material, including
the plastic bag the filter is wrapped in.
NOTE: Refer to CLEANING AND MAINTENANCE section of this manual for
information on how to access and install the filter.
Place the Air Purifier on a firm level surface with the controls facing upwards, making
sure nothing is obstructing the air flow on any side of the air purifier.
Plug the AC power adapter into the AC input connection located at the bottom rear
of the unit. Plug the AC adapter into the wall socket.
When the air purifier is plugged in, it will beep and the POWER button will
illuminate.
Tap the POWER button on the air purifier to start the air purifier. The fan speed will
set at LOW.
Page 7