Bravetti F1053B Guide Du Propriétaire page 3

OPERATING INSTRUCTIONS
Before Using Your Deep Fryer
DO NOT immerse the deep fryer in
water.
Make sure the fryer is unplugged. Wash
the fryer baskets and cover in hot, soapy
water. Wipe dry thoroughly. Wipe the
inside of the oil reservoir with a damp
cloth and wipe dry thoroughly before
adding the oil.
Warning:
All components must be
completely dried before filling with oil or
using. Special care must be taken to
ensure the filter compartment and cover
are completely dry, otherwise the filter
will not function properly and may lead to
steam being trapped within the fryer
during use.
Assembling Your Deep Fryer
Caution
: Never turn on the deep fryer
when the oil reservoir is empty. Always
ensure the deep fryer is out of the
reach of children. Always use the deep
fryer on a flat, heat resistant surface.
1. Make sure that the On/Off switch is
in the "Off" position.
2. Attach the "break-away" safety cord.
The top of the cord can be identified
by the "THIS SIDE UP" raised print.
(Fig. 1) When attaching cord - you will
feel a magnetic pull on the cord when
attaching cord correctly.
"This Side Up"
Fig. 1
3. Pour cooking oil into the oil reservoir
until the oil level is between the
"MIN" and "MAX" marking on the
inside of the oil reservoir. Do not
exceed the "Max" level for cooking
oil. (Fig. 2)
Max level
for cooking oil.
MAX
4. To attach the handle to the fryer
basket, pinch the two handle ends
together to insert the metal part of
the handle inside the basket handle
bracket on the fryer basket. (Fig. 3)
Press together
Fig. 3
Filling the Oil Reservoir With Oil
Warning:
Never plug in the deep
fryer before filling with oil to specified
level.
• Use blended vegetable oil, pure corn
oil or canola (rapeseed) oil. Do not
use olive oil, margarine, lard or
drippings.
• The oil level must always be
maintained between the minimum and
the maximum levels marked inside the
oil reservoir. (Fig. 4) Check the oil level
before each use. For best results, keep
the oil close to the maximum level.
Never mix different oils and fats
together. Do not mix old and new oil.
Oil level
indicator
Using Solid Fat
Warning:
It is NOT RECOMMENDED
to put solid shortening in the oil reservoir
or the fryer basket.
• If using solid vegetable shortening,
melt it first in a separate pan and then
very carefully pour the melted fat into
the oil reservoir.
• Previously used solid vegetable
shortening which has curdled and
hardened in the oil reservoir should be
removed from the oil reservoir and
melted in a separate pan before
Fig. 2
reusing.
3
Caution:
If you try to melt the solidified
fat in the oil reservoir, there is a risk of
warm melted fat suddenly sputtering from
below through the still solid top layer of fat.
Therefore use only the following procedure:
• Make sure the fat is at room
temperature. If the fat is very cold,
there is a greater risk of splashing.
here.
• Using a fork, carefully make some
holes in the fat. Make sure the cover is
securely closed while fat is melting.
Heat fat slowly - on lowest temperature
setting.
Using Your Deep Fryer
Caution
: Never turn on the deep
fryer when the oil reservoir is
empty. Always ensure the deep
fryer is out of the reach of children.
Always use the deep fryer on a flat,
heat resistant surface.
1. Place the desired basket in the
deep fryer. If you will be using the
two small baskets, then slide the
oil reservoir divider into the oil
reservoir. If using only the large
basket, then remove the divider
before the oil gets hot. Never try
to remove the divider from the
oil reservoir in between cooking
as it gets very hot. Always allow
to cool completely (approximately
2 hours before removing from the
deep fryer.
2. Close the cover on deep fryer.
3. Set the On/Off switch to the "On"
position. The power on light will
turn "On".
4. Slide the temperature control to
the desired temperature setting.
Fig. 4
5. When cooking oil reaches the set
temperature, the temperature
ready light will turn on.
Note
: The indicator light will cycle off
and on during the frying cycle as the
unit maintains the selected
temperature.
6. Press the cover release button to
open the fryer cover. (Fig. 5)
OPERATING INSTRUCTIONS
7. Lift the fryer basket onto the fryer
basket holder mount. (Fig. 6) Place
food into the fryer basket, carefully
lower the fryer basket back into the
heated oil and close the cover.
Fig. 6
8. When cooking is complete, open the
cover and allow hot steam to
escape.
9. Lift the frying basket and hook the
basket onto fryer basket holder
mount to allow the food to drain.
(Fig. 6)
10. Remove the food from the fryer
basket by lifting basket by its handle
and CAREFULLY pouring the food
onto a plate covered with paper
towels or into desired serving
container or by using tongs to
remove the food from the frying
basket and placing onto the serving
container.
11. Repeat procedure for remaining food
to be cooked.
12. When the cooking is complete, turn
the deep fryer off, unplug and allow
the oil to cool for approximately 2
hours before attempting to remove
the oil, reservoir divider or clean the
fryer.
Important:
Always replace or remove
the frying basket carefully when cooking.
Caution
: Never touch any metal parts
on the deep fryer as they may be hot.
Warning:
Never use the break-away
safety cord to turn the deep fryer "Off".
Always turn unit Off by setting the On/Off
switch to the "Off" position. Disconnect
the power cord from the wall outlet. Use
only the power cord provided with the
deep fryer. Use of any other magnetic
cord could cause fire, electric shock or
injury.
Fig. 5
4
Fryer basket
holder mount