Pair The Headset - NGS electonics ARTICA JELLY Mode D'emploi

ENGLISH
EARPHONE CHARGING
1. Built-in rechargeable Lithium battery.
2. lt must take 3 hours for the first time charging.
3. Connect the charger cable to the charger connector. The
Red indicator light is displayed during charging. Charging
the battery fully may take about 2 hours.
4. When the battery is fully charged, the red indicator light
becomes dimmer until it almost off. Disconnect the
charger from the headset and the outlet. The headset is
ready to use.

PAIR THE HEADSET

If your phone supports the A2DP Bluetooth profile and has
a music player feature, you can use the phone to make and
receive calls, and to play music with the headset.
1. Ensure that your phone or music device is on and the
headset is off.
2. Switch the power switch to the ON position. The blue light
will flash.
3. Activate the Bluetooth feature on your phone or music
player, and set it to search for Bluetooth devices.
4. Select the headset NGS ARTICA RUNNER from the list of
founded devices on your phone or music player.
5. When the headset is connected to your device and is ready
for use, the Blue indicator light will flash every 5 seconds.
3