Placement Of Main Unit And Sensor; Precautions - Oregon Scientific EW98 Manuel De L'utilisateur

Low battery indicator
Note
Attention! Please dispose of the used unit or batteries
in an ecologically safe manner.

PLACEMENT OF MAIN UNIT AND SENSOR

For the sensor, place the screw on the desired wall
and hang the sensor by the recessed hole in the
back of it or simply place it on the desktop.
For the main unit, you can just place it on the table
by itself.

PRECAUTIONS

This product is engineered to give you years of
satisfactory service if you handle it carefully. Here
are a few precautions:
• Do not cover the ventilation holes. Make sure
items that are nearby such as newspapers,
tablecloths, curtains etc cannot accidentally
cover the ventilation holes.
• Do not subject the unit to excessive force,
shock, dust, temperature or humidity, which
may result in malfunction, shorter electronic
life span, damaged battery and distorted parts.
• Placement of this product on wood surfaces
with certain types of ûnishes, such as clear
varnish, may result in damage to the ûnish.
Consult the furniture manufacturer's care
instructions for direction as to the types of
objects that may safely be placed on the
wood surface. Oregon Scientiûc shall not be
responsible for any damage to wood surfaces
from contact with this product.
• Do not immerse the unit in water. If you spill
liquid over it, dry it immediately with a soft,
lint-free cloth.
• Do not clean the unit with abrasive or corrosive
materials.
10