Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tools needed for installation..................................... 2
IBeam Specifications ................................................. 2
Recommended Amplifier Specifications ................. 2
Introduction and Precautions ................................... 3
Vehicle Installation .................................................... 4
Home Theater Installation .....................................5-6
Troubleshooting ......................................................... 7
Warranty .................................................................... 7
Tools needed for installation.
Drill
Drill bit for pilot holes. 1/8" (3mm)
#2 Phillips head bit with extension OR #2 Phillips head screwdriver.
Wire cutters
Wire strippers (16/14 or 12AWG)
You will also need an adequate length of 16/14 or 12 AWG (American Wire
Gauge) speaker wire for connection to your IBeam tactile transducer.
IBeam Tactile Transducer Specifications
2.00"
(5.08cm)
6.875"
(17.46cm)
Recommended Amplifier Specifications
Minimum: Amplifiers producing 100 Watts @ 4-ohms is the minimum recommendation.
Optimum: Amplifiers producing 150 - 250 Watts @ 4-ohms offer the best experience.
Contents
Model Number:
Size (H x W x D):
Weight:
Force / Watt: 2.5 lbs/Watt (11.1 Newtons/Watt)
Continuous Power Handling:
Peek Power Handling:
Overload Protection:
4.25"
Impedance:
(10.79cm)
Frequency Response:
IB-200
2.0" x 4.25" x 6.875"
2.5 lbs (1.13 Kg)
100 Watts
250 Watts
PPTC self reset fuse
4-ohms
20Hz - 800Hz
Publicité
Chapitres
Table des Matières
Dépannage
